Business hours: 8:00 a.m. to 5:00 p.m. (Central) Monday – Friday
430C
General Information
Years Built
1959-1960
Factory
Dubuque, Iowa USA
Beginning and Ending SN
First…..140001 Date…..July 7, 1958
Last…..161072 Date
Unknown
More 430C Details
Year and Serial No. Breaks
1959…..140001-157032
1960…..157024-161096
Note. Serial Numbers 148844-155000 were not used
Total Produced
Gas…..2203
All Fuel…..33
LP…..4
Total…..2240
Original Price
$3246.00
Specs
Note. 430 Series were not tested at Nebraska. Tests are the same as the 420 Series.
Engine
Gasoline
Manufacturer: John Deere
Four stroke cycle, Valve-in-Head
Fuel: Gasoline
Aspiration: Natural
Displacement: 113.3 c.i.
Bore and Stroke: 4.25″ x 4.00″
Maximum HP at the Drawbar: 23.53
Maximum HP at the Belt: 28.76
Maximum Torque at the Engine: 90 foot-pounds
RPM at Maximum Torque: 1300
Cylinders: 2
Valves: 4
Cooling: Liquid
Compression ratio: Approx. 7.0 to 1
Engine Speed: Rated load…..1850, Fast Idle…..2025, Slow Idle…..550
Firing Order: 1-2
Air Cleaner: Oil Bath
Starter Volts: 6
Spark Plug Gap: .025″
Distributor Point Gap: .022″
Intake Valve Clearance: .015″ (when cold)
Exhaust Valve Clearance: .015″ (when cold)
Oil Capacity: 5 qts. (including oil filter)
Coolant Capacity: 3-1/2 gals.
All Fuel
Manufacturer: John Deere
Four stroke cycle, Valve-in-Head
Fuel: All Fuel
Aspiration: Natural
Displacement: 113.3 c.i.
Bore and Stroke: 4.25″ x 4.00″
Maximum HP at the Drawbar: 23.53
Maximum HP at the Belt: 28.76
Maximum Torque: 90 foot-pounds
RPM at Maximum Torque: 1300
Cylinders: 2
Valves: 4
Cooling: Liquid
Compression: Approx. 5.2 to 1
Engine Speed: Rated load…..1850 Fast Idle…..2025 Slow Idle…..550
Firing Order: 1-2
Air Cleaner: Oil Bath
Starter Volts: 6
Spark Plug Gap: .025″
Distributor Point Gap: .022″
Intake Valve Clearance: .015″ (when cold)
Exhaust Valve Clearance: .015″ (when cold)
Oil Capacity: 5 qts. (including oil filter)
Coolant Capacity: 3-1/2 gals.
LP
Manufacturer: John Deere
Four stroke cycle, Valve-in-Head
Fuel: LP
Aspiration: Natural
Displacement: 113.3 c.i.
Bore and Stroke: 4.25″ x 4.00″
Maximum HP at the Drawbar: 23.53
Maximum HP at the Belt: 28.76
Maximum Torque: 90 foot-pounds
RPM at Maximum Torque: 1300
Cylinders: 2
Valves: 4
Cooling: Liquid
Compression: Approx. 7.0 to 1
Engine Speed: Rated load…..1850 Fast Idle…..2025 Slow Idle…..550
Firing Order: 1-2
Air Cleaner: Oil Bath
Starter Volts: 6
Spark Plug Gap: .025″
Distributor Point Gap: .022″
Intake Valve Clearance: .015″ (when cold)
Exhaust Valve Clearance: .015″ (when cold)
Oil Capacity: 5 qts. (including oil filter)
Coolant Capacity: 3-1/2 gals.
(Transmission) Gears: 4 Forward and 1 Reverse
(A Directional Reverse was an available Option for $210.50)
Travel Speeds:
First .82 mph
Second…..2.21 mph
Third…..2.95 mph
Fourth…..5.31 mph
Reverse….1.64 mph
Gears: 5 Forward and 1 Reverse
Travel Speeds:
First .89 mph
Second…..2.21 mph
Third…..2.95 mph
Fourth…..3.83 mph
Fifth…..5.74 mph
Reverse…..1.64mph
Type: Selective Sliding Gear
Oil Capacity: 6-1/2 qts. (Transmission and Differential) 7/8 qt. each (Final Drives)
Oil type without Reverser Unit Use SAE 90 With Reverser Unit Use SAE 80 or 90 Multi-Purpose Lubricant (Transmission and Differential)
SAE 90 (Final Drives)
ATF (Reverser)
Dimensions
(4 Roller)
Over-All Height…..69”
Height to Top of Grille…..51-7/8”
Over-All Width…..56”
Over-All Length…..102”
Center-of-idler-to-center-of-sprocket…..(approx.) 56”
Clearance…..12”
Shipping Weight…..4150 lbs.
Turning Radius…..6 Ft.
No. of Shoes per Track…..31 (Regular) 32 (with oversize idler)
(5 Roller)
Over-All Height…..69”
Height to Top of Grille…..51-7/8”
Over-All Width…..56”
Over-All Length…..102”
Center-of-Idler-to-center-of-sprocket…..66-3/8”
Clearance…..12”
Shipping Weight…..4700lbs.
Turning Radius…..6-1/2 Ft.
No. of Shoes per Track…..35
Tread Widths (Center-to-Center)
Track
10” Shoe:…36”, 38”, 44”, or 46” 12” Shoe:…..38”, 44”, or 46” 14” Shoe:…..44”,
Grouser Shoe Widths…..10″, 12″,or 14″
Snow Shoe Width…..12″ or 14″
Malleable Flat Street Shoe Width…..10″ or 12″
Rubber Shoe Width…..10″ only
Misc
Fuel System Capacity…..10.5 gals.
Starting Tank (All Fuel)…… .9 gals.
Hydraulic System Capacity (Remote System) ……9 qts. of oil
Type…..SAE 10W Oil
Popular Options
All Fuel Engine…..$32.00
LP Engine…..$254.50
430C Parts
Engine
-
30H17A Expansion Plug
$1.10 -
AM1717T Oil Seal
$33.30 -
AR21840R (Large)
$1.43 -
JD8511 Bearing
$18.71 -
M761 (2) T, Camshaft Bearing Set
$58.80 -
M885T Cam Insert
$12.95 -
M3154T Exhaust Valve
$20.67 -
M3414T Cam Follower
$71.20 -
M1868T Drive Shaft
$129.95 -
AM1149TK2 Hydraulic Pump Reseal Kit, 40 series
$36.03 -
AH1111RT Oil Filter
$37.30 -
JD9377 Water Pump Bearing
$62.14
Fuel System
Cooling System
Engine Clutch
Reverser
Transmission
-
JD7262R Bearing Cup
$17.79 -
JD7272, JD8315 Cup, Bearing, Outer
$25.74 -
JD7372 Cone, Bearing
$24.23 -
JD7442 Bearing, Cup
$33.31 -
JD7938 Cylindrical Roller Bearing
$92.42 -
JD8123 Bearing, Cone
$53.09 -
JD8124 Bearing, Cone
$66.73 -
JD8117T Bearing, Cone
$29.61 -
JD8901 Bearing, Cone
$58.57 -
T12840T Gasket
$14.63 -
JD8840T Thrust Bearing
$10.25 -
L357T Snap Ring
$19.87
Differential
Final Drive
-
M947T Gasket
$8.61 -
JD8134T Bearing Cone
$18.71 -
JD8179T Bearing Cone
$41.43 -
JD8220 Cup Bearing
$21.88 -
19H1377 Cap Screw
$2.10 -
AT15155 Bull Gear
$630.00 -
AT15156 Bull Gear
$630.00 -
JD7272, JD8315 Cup, Bearing, Outer
$25.74 -
JD7939 Cylindrical Roller Bearing
$53.04 -
JD8146-JD7589 Bearing Cup
$35.75 -
M214T
$10.00
Controls/Instruments
-
M947T Gasket
$8.61 -
JD8134T Bearing Cone
$18.71 -
JD8179T Bearing Cone
$41.43 -
JD8220 Cup Bearing
$21.88 -
19H1377 Cap Screw
$2.10 -
M1448T Rubber Boot
$24.95 -
AT15155 Bull Gear
$630.00 -
AT15156 Bull Gear
$630.00 -
JD7272, JD8315 Cup, Bearing, Outer
$25.74 -
JD7939 Cylindrical Roller Bearing
$53.04 -
JD8146-JD7589 Bearing Cup
$35.75 -
M214T
$10.00
Frame and Chasis
Hydraulics
Drawbar and Hitch
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
Sheet Metal
Seats
Steering Clutch
-
M3293T Steering Disk Facing, Fiber
$22.44 -
M811T Gasket
$11.26 -
30H17A Expansion Plug
$1.10 -
JD8567 Bearing
$27.41 -
M872T Clutch Plate
$26.57 -
M885T Cam Insert
$12.95 -
M886T Ball
$1.45 -
M2010T Steering Lever Shaft
$157.50 -
L299T Adjustable Yoke
$18.44 -
M1447T Boot Nipple
$35.02 -
M1448T Rubber Boot
$24.95 -
AT15155 Bull Gear
$630.00
Under Carriage
Electrical
Decals
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
Specialty Parts
Specialty Tools
Under Development
Misc.
Manuals
Keep ‘Em Crawling • 402-670-3573 • 1013 State Street, Blair, NE 68008 © 2024
Business hours: 8:00 a.m. to 5:00 p.m. (Central) Monday – Friday
Keep ‘Em Crawling • 402-670-3573
1013 State Street, Blair, NE 68008
© 2024
Business hours
8:00 a.m. to 5:00 p.m. (Central)
Monday – Friday